This post will provide you with the basic information on how a remote
controlled vehicle can be constructed. Read on to know more about this.
The components required to construct the vehicle is listed below:
The components required to construct the vehicle is listed below:
- 1.2Ghz 1000mW Receiver+Transmitter
- USPS Priority Mail boxes
- Hitec Optima 6 2.4Ghz Receiver
- Arrowind 18A Brushless Speed Controller
- 2200mAh 20C LiPo Battery Pack
- Brushless motor
- Custom motor-reversing relay board
- Foam wheels
- 7-Inch Handheld LCD TV
- Servo
The
first thing to do here is to test the wireless transmitter. All the
required components are mounted on the USPS mail box. Once the test is
done, the box is strapped onto a nitro RC truck. The vibrations caused
prevents the truck to be driven via the wireless video feed. The best
thing to do in this case is to add wheels and propulsion to the box.
Remote Controlled Surveillance Robot
Reviewed by SYLVESTER ANWAR MASHI
on
05:37
Rating:
Reviewed by SYLVESTER ANWAR MASHI
on
05:37
Rating:
No comments: