This circuit will turn on/off 12V DC fan or CPU fan when temperature
above normal temperature.You can set turn on temperature by adjust VR1.
Automatic fan controller Circuit Diagram:
This circuit use an NTC (Negative temperature coefficient)which is a
thermistor is one in which the zero-power resistance decreases with an
increase in temperature. So If temperature increate the voltage at pin 3
on LM311 will decreated .The resistance of NTC is about 10K at 25'c.
VR1 should be multi-turn potentiometer type such 10K/25 turn.
Automatic fan controller Circuit Diagram:
VR1 should be multi-turn potentiometer type such 10K/25 turn.
Automatic fan controller
Reviewed by SYLVESTER ANWAR MASHI
on
06:25
Rating:
Reviewed by SYLVESTER ANWAR MASHI
on
06:25
Rating:
No comments: